|
Material safety data sheet (MSDS)
|
| |
|
1. Chemical
product and company identification |
| Trade
Name |
: |
LUBOLIC ( ECO
) |
|
2.Composition
/ ingredients |
| Chemical
Composition |
: |
Mainly
Oleic Acid & Linoleic Acid |
| Average
Molecular Weight |
: |
282.5
|
| Chemical
Identity of ComponentsCH3
(CH2) 7 CH=CH (CH2)7
COOHCH3
(CH2)5(CH=CH)2(CH2)7
COOH |
: |
Synonym
Octadecenoic
Acid
Octadecandioic
Acid |
CAS
Nos. of Components
112-80-1
60-33-3
|
|
3.Hazard
identification (reference: 4) |
| Health
Rating |
: |
Slight
|
| Flammability
Rating |
: |
Slight
|
| Reactivity
Rating |
: |
Slight
|
| Contact
Rating |
: |
Slight
|
| Storage
|
: |
General |
|
4. First-aid
measures (reference: 4) |
| Ingestion
|
: |
Drink
plenty of water |
| Skin
|
: |
Remove
contaminated clothing and wash exposed area with plenty of water
followed by soap and water |
| Eye
|
: |
Irrigate
the eyes with plenty of water |
| Inhalation
|
: |
Take
person into fresh air and allow to rest
|
| *In
all of the above cases, get a doctor to check the affected person. |
| 5.
Fire hazard and fire-fighting measures (reference: 1, 4)
|
| Flammability
|
: |
Flammable
and Combustible in contact with heat or fire |
| Means
of Extinction |
: |
Use
Water spray, Carbon Dioxide, Dry Chemical, or Alcohol Foam. Use
Water to keep fire exposed container cool |
| Flash
Point |
: |
189
°
C |
| Auto
Ignition |
: |
363
°
C |
| Hazardous
Combustion Product |
: |
Cracked
hydrocarbons |
|
6. Accidental
release (reference: 4) |
| Personal
Protection |
: |
Use
complete protective gear as prescribed in Section 8. High risk of
slipping as product is a liquid |
| Leak
And Spill Procedures |
: |
Remove
sources of ignition, ventilate area, sweep up the liquid in dry
sand and shovel into a closed container. Collect spillages into
sumps/traps so as to minimise contamination of drains, surface &
ground waters. |
|
7. Handling
and storage measures (reference: 4, 5) |
| Handling
Containers |
: |
Use
full protective gear. Protect containers against physical damage
/ direct sunlight / water |
| Storage
Conditions of Containers |
: |
Use
leak-proof and compatible Drums. Store in dry and well ventilated
locations at ambient temperature away from direct sunlight. |
|
8. Exposure
controls and personal protection measures (reference: 4, 5)
|
| Engineering
Control |
| Use
adequate ventilation to keep airborne concentrations low. Avoid inhalation
of heated vapours. |
| Personal
Protection |
| Skin
|
: |
Rubber
Gloves |
| Respiration
|
: |
Air
respirator |
| Eyes
|
: |
Goggles
|
| Feet
|
: |
Safety
Shoes |
| Body
|
: |
Lab
Coat |
| Hygienic
precautions |
: |
Remove
contaminated clothing and wash hands between breaks and at the end
of duty hours. Eye washes & Emergency Showers must be located
in all work & storage areas.
|
|
9. Physical
and chemical properties (reference: 1, 4 and 5) |
| Physical
State |
: |
Liquid
above 30 °C |
| Odour
& Appearance |
: |
Yellow
Liquid with Slight Odour |
| Specific
Gravity |
: |
0.884
at 60 °C |
| Boiling
Point |
: |
264
°C at 50mm |
| Melting
Point |
: |
18
to 25 °C |
| Vapour
Pressure |
: |
1mm
at 176.5 °C |
| Solubility
in water ( 20 °C ) |
: |
Insoluble |
|
10.
Reactivity data (reference: 4, 5) |
| Chemical
Stability |
: |
Product
stable under the prescribed storage conditions. |
| Incompatibility
with Substances |
: |
Perchloric
Acid |
| Reactivity
/ Conditions |
: |
Peroxidized
acid with Aluminium |
| Hazardous
Decomposition |
: |
Acrid
smoke & irritating fumes of Carbon Oxides when heated above
its BP |
| Hazardous
Polymerization Products |
: |
None
|
|
11. Toxicological
properties (reference: 2, 3, 4, 5) |
| Toxicity
|
: |
Non
toxic |
| Skin
contact |
: |
Slight
Erythema |
| Inhalation
|
: |
Slight
|
| Skin
absorption |
: |
Slight
|
| Eye
contact |
: |
Slight
Irritation |
| Ingestion
|
: |
rat
LD50 > 21.5 ml/kg |
| Effect
of Acute and Chronic Exposure to Material |
: |
The
extensive use of Oleic & Linoleic Acids in Industry has not
been accompanied by any reports of injury. |
| Irritancy
of Material |
: |
Slight
|
| Carcinogenicity,
Reproductive Effects, Teratogenicity, Mutagenicity |
: |
None
Reported |
|
12.
Ecological information (reference: 4, 5) |
| The
product should not get into waters without treatment. Dissolved
in water the material is easily biodegradable ( 90 % ) and will
not cause any disturbance in the waste water treatment plants. Due
to its insolubility in water larger amounts need to be eliminated
by separators typically used for fats and oils. |
| Aquatic
Ecotoxicity
Fish LC50
( 96 hrs ) > 205 mg/L |
|
13. Waste
disposal (reference: 4, 5) |
| Leak
And Spill Procedures |
: |
Sweep
up the liquid in dry sand and shovel into a closed container
|
| Disposal
|
: |
Stored
waste / recovered material used for recycle along with crude oils.
Any unrecoverable / recyclable materials should be disposed off
in accordance with the local, state or federal regulations.
|
|
14.
Transport recommendations (reference: 4, 5) |
| No
special conditions, as it is not a regulated product. However one
should observe the usual precautionary measures for transporting
chemical cargo. |
|
15. Regulatory
requirements (reference: 4, 5) |
| According
to the data available the product is not a regulated product. However
one should observe the prescribed Federal, State & Local measures
for dealing with chemicals. |
| Hazard
Identification |
: |
Irritant |
| Risk
Phrases |
:
|
R
36, 38 |
| Safety
Phrases |
:
|
S
2, 24, 25 |
| The
above mentioned classification is valid for Industrial users of
this product
The 2
major Components are listed on EINECS( EU ), TSCA(USA), DSL(Canada),
AICS (Australia) & MITI(Japan)
EINECS
No. : Oleic Acid 204-007-1 Linoleic Acid 200-470-9
Not listed
as a Carcinogen by NTP, IARC or OSHA |
|
16. Other
information |
| Note
:- All the above data is based on only the 2 major fatty acids of
this mixture.
Sources
of information
1. Fatty
Acids - Klare Markley (1960)
2. Palm
Oil Developments No. 28 Page 22 - 49 (March 1998)
3. JAOCS
56 Page 760A - 767A (1979)
4. ICN
Biochemicals - MSDS of Oleic Acid (31-12-1998)
5. Cognis
Corporation – MSDS of Linoleic Acid (09/01/2001) |
| |
Disclaimer
The information presented above is believed to be accurate and pertains
only to the product when stored in a sealed condition as prescribed
above. The information is given in good faith but no warranty express
or implied is made. Users should make their own investigations to
determine the suitability of the above mentioned safety information
for their specific applications and processes. Godrej Industries Limited
shall in no way be liable for any claims, losses, damages of any third
party or for lost profits or any special, indirect, incidental, consequential
or exemplary damages howsoever arising, from the use of this product.
|