Bhuta International

Administrative Office: 101/103, Nalin Apartments, 29, JayPrakash Road, Andheri (W), Mumbai - 400 058, Maharashtra, India. Phone: 91-22-6450 2858/2859 2670 5940/5941 Fax: 91-22- 2628 7944 Cable: 'BHUTA'
E-mail us at sales@bhutainternational.com



Material safety data sheet (MSDS)
 
Commercial name   Ginol 810
Chemical name Octyl-decyl alcohol

2. Composition / ingredients

CAS number   111-87-5/112-30-1
EINECS number   2203-917-6/203-956-9
Synonyms  

OCTA-DECYL ALCOHOL

GINOL 810
C8-10 ALCOLHOL
CAPRILIC-CAPRIC ALCOHOL
OCTA-DECANOL
3. Hazard identification (reference: 4)
Irritant   Slightly irritating to eyes, respiratory system and skin.
Combustible
4. First-aid measures (reference: 4)
Skin   Wash exposed area with soap and plenty of water.
Eye   Wash eyes with plenty of water for at least 15 minutes.
Inhalation   Take affected person into the open air and allow him to rest. Give oxygen if breathing is difficult; also give artificial respiration.
Swallowing   Wash the affected person's mouth with plenty of water, provided he is conscious. Call a doctor.
* In all of the above cases, get a doctor to check the affected person.
5. Fire hazard and fire-fighting measures (reference: 1, 4)
Flash point   Ca 95°C
Means of extinguishing   Carbon dioxide, dry chemical powder or appropriate foam.
Special fire-fighting procedures   Wear self-contained breathing apparatus and fully protective clothing to prevent contact with skin and eyes.
Combustible   Unusual fire and explosion hazards.
6. Accidental-release measures (reference: 4)
Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves.
Absorb on sand and place in a close container for disposal.
  Ventilate area and wash spill site after material pickup is complete.
Maintain liquid trapping sumps and enclosures to collect large amount of spillage. This could be recycled to the crude storage tanks.
7. Handling and storage measures (reference: 4, 5)
Handling   Handle with good hygiene and safety procedures. Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves. Do not breathe vapour, and avoid contact with eyes, skin and clothing. Avoid prolonged or repeated exposure, and wash thoroughly after handling.
Storage conditions   Keep container closed and store in a cool, dry place. Suitable storage material: SS tank / laquor-lined MS drums / HDPE drums.
8. Exposure controls and personal protection measures (reference: 4, 5)
Mechanical safety required
Chemical safety goggles
Rubber gloves
NIOSH- / MSHA-approved respirator
Safety shower and eye bath
9. Physical and chemical properties (reference: 1, 4, 5)
Appearance   Clear liquid at 30°C
Boiling point   190°C to 260°C
Solidification point   11°C to -7°C
Vapour pressure   0.14mm HG at 22°C
Density @ 60°C   4.5
10. Stabality and reactivity data (reference: 4, 5)
Chemical stability   Product is stable
Hazardous polymerisation products   None
Incompatibilities   Strong oxidising agents: strong acids, acid chlorides, acid anhydrides.
Hazardous combustion or decomposition produces toxic fumes   Carbon monoxide and carbon dioxide
11. Toxicological information (reference: 2, 3, 4, 5)
Acute effects   May be harmful by inhalation, injestion or skin absorption.
Vapour or mist is irritating to the eyes, mucous membrane and upper respiratory tract.
Exposure can cause nausea, headache and vomiting.
Irritation   SKN-RBT: 500 mg / 24 H
Toxicity data   ORL-RAT LD50: 3200 mg / kg
ORL-MUS LD50: 1790 ml / kg
Target organ data   Not available
12. Ecological information (reference: 4, 5)
Impact on aquatic organism   Data not available
The product should not get into any kind of water without treatment. Dissolved in water, the material is easily biodegradeable (90%) and will not cause any disturbance in wastewater-treatment plants. Due to its insolubility in water, larger amounts need to be eliminated by separators, such as those typically used for fats and oils.
13. Waste disposal (reference: 4, 5)
Disposal of small amounts of waste material has to be done in accordance with federal, state and local enviornmental regulations.

Larger amounts should be collected as described in section 6 and used for recycling crude raw materials.

May be burnt in chemical incinerator equipped with after burner and scrubber.
14. Transport recommendation (reference: 4, 5)
Keep the container tightly closed.
Keep away from heat and other flame.
Material should be transported in a closed container to protect it from direct source of heat and to avoid exposure to highly humid conditions.
Contact Godrej Industries Limited for further information on transportation.
Observe all federal, state and local regulations for liquid transportation.
15. Regulatory information (reference: 4, 5)

European information
Irritant

In case of contact, wash exposed area with soap and plenty of water and seek medical advice.
Wear suitable protective clothing.
Handle the product according to federal, state and local regulations.
16. Other information

The information presented here pertains to the product when stored in a sealed condition as prescribed above. This information is given in good faith by Godrej Industries. The manufacturer makes no warranties on the adequacy of the information contained herein. Each user of this material needs to evaluate his/her own conditions of storage to use this product safely.



© 2006 Bhuta Intenational