Bhuta International

Administrative Office: 101/103, Nalin Apartments, 29, JayPrakash Road, Andheri (W), Mumbai - 400 058, Maharashtra, India. Phone: 91-22-6450 2858/2859 2670 5940/5941 Fax: 91-22- 2628 7944 Cable: 'BHUTA'
E-mail us at sales@bhutainternational.com




Material safety data sheet (MSDS)
 
Commercial name Ginol 18
Chemical name   Stearyl alcohol
Manufacturer's name and address   Godrej Industries Limited, Plot No 3, Village Kanerao, Taluka Valia, District Bharuch,
Gujarat, India.
Pin: 393135
Telephone   91-2643 70756 / 57 / 58 / 59 / 60
Fax   91-2643 70018

2. Composition / ingredients

CAS number   112-92-5
EINECS number   204-017-6
Synonyms  

OCTADECANOL

N-OCTADECANOL
OCTADECYL ALCOHOL
N-OCTADECYL ALCOHOL
STEAROL
STEARYL ALCOHOL
3. Hazard identification (reference: 4)
Irritant   Slightly irritating to eyes, respiratory system and skin.
Slightly irritating to gastrointestinal tract on injestion.
  Tendency to form dust.
4. First-aid measures (reference: 4)
Eye   Wash eyes with plenty of water for at least 15 minutes.
Inhalation   Take affected person into the open air and allow him to rest.
Swallowing   Wash the affected person's mouth with plenty of water, provided he is conscious. Call a doctor.
*In all of the above cases, get a doctor to check the affected person.
5. Fire-fighting measures (reference: 1, 4)
Flash point   Ca 195°C
Means of extinguishing   Carbon dioxide, dry chemical powder or appropriate foam
Explosion limits in air  

Upper: 8%
Lower: 1%

Autoignition temperature   250°C
Special fire-fighting procedures   Wear breathing apparatus and fully protective clothing to prevent contact with skin and eyes.
6. Accidental release measures (reference: 4)
Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves.
Sweep up place in a bag and hold for waste disposal. Avoid raising dust.
Ventilate area and wash spill site after material pickup is complete.
7. Handling and storage measures (reference: 4, 5)
Handling   Handle in accordance with good hygiene and safety procedures. Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves. Do not breathe dust, and avoid contact with eyes, skin and clothing. Avoid prolonged or repeated exposure and wash thoroughly after handling.
Storage conditions   Keep container closed and store in a cool, dry place. Suitable storage material: SS tank / laquor-lined MS drums / HDPE-laminated bags with liners.
8. Exposure controls and personal-protection measures (reference: 4, 5)
Ventilation of area
Chemical safety goggles
Rubber gloves
Availability of NIOSH- / MSHA-approved respirator, although not required for normal use
Safety shower and eye bath
9. Physical and chemical properties (reference: 1, 4, 5)
Appearance   White flakes (clear liquid when melted)
Boiling point   330°C to 360°C
Solidification point   55°C to 58°C
Vapour pressure   0.1mm at 38°C
Vapour density   9.3
Density @ 60°C   0.81
Solubility of water   Negligible
10. Stabality and Reactivity data (reference: 4, 5)
Chemical stability   Product is chemically stable
Hazardous polymerisation products   None
Incompatibilities   Strong oxidising agents; strong acids
Hazardous combustion or decomposition produces toxic fumes   Carbon monoxide and carbon dioxide
11. Toxicological information (reference: 2, 3, 4, 5)
Acute effects   Practically-non toxic by injestion
Mild eye and skin irritation
Irritation   Skin-RBT 500 MG/KG/24H MLD
Eye-RBT 100 MG MLD
Toxicity data   ORL-RAT LD50: 20 gm / kg
Target organ data   Not available
12. Ecological information (reference: 4, 5)
Impact on aquatic organism   Data not available
The product should not get into any kind of water without treatment. Dissolved in water, the material is easily biodegradeable (90%) and will not cause any disturbance in wastewater-treatment plants. Due to its low solubility in water, larger amounts need to be eliminated by separators, such as those typically used for fats and oils.
13. Waste disposal (reference: 4, 5)
Disposal of small amounts of waste material to be done in accordance with federal, state and local enviornmental regulations.

Larger amount to be collected as described in section 6 and used for recycling crude raw materials.

14. Transport recommendation (reference: 4, 5)
D.O.T. is non-hazardous
No restriction on transport as it is not a regulated product.
Material should be transported in a closed container to protect it from direct source of heat, and to avoid exposure to highly humid conditions.
Contact Godrej Industries Limited for further information on transportation.
15. Regulatory information (reference: 4, 5)

According to available data, this product is not dangerous. However, one should observe precautionary measures for dealing with chemicals according to federal, state and local requirements.

16. Other information

The information presented here pertains to the products when stored in a sealed condition as prescribed above. This information is given in good faith by Godrej Industries Limited. The manufacturer makes no warranties on the adequacy of the information contained herein. Each user of this material needs to evaluate his/her own conditions of storage to use this product safely.



© 2006 Bhuta Intenational